MyTe Winch

Model LD100AB

Purchase ONLINE MyTe Winch Portable Winch Hoist

MyTe Winch LD100AB Loop Drive Drawing

Information Required to Quote Electric Winch or Hoist

How to Size a Winch or Hoists

Construction Features:
• Heavy-duty angle base drilled for six 1/2" mounting bolts
• Installation requires no welding
• Fully sealed aluminum gear housings with precision-cut gears running in an oil bath
• Hardened steel worm and forged bronze worm gear holds load in position when stopped
• Stress-proof drum shafts
• Frictionless bearings
• 286:1 gear reduction

Power:
• Universal 18,500 RPM reversible 1.25 HP brake motor (no-load speed)
• 15' power cord plugs into any 115 Volt AC grounded outlet
• 6 amp – No load
• 14 amp – Full load Pulling Capacity:
• 20,000-lb rolling load capacity
• 800-lb line pull
• Rolling load capacity is dependent on floor surface and wheel/caster condition

Speeds:
• 59 RPM: no-load drum speed
• 37 FPF: 10,000-lb rolling load
• 31 FPM: 20,000-lb rolling load Cable Drums:
• Two welded steel cable drums grooved for 1/4" cable
• Lower drum is gear driven
• Upper drum not powered

Cable Strength:
• Recommended 1/4" diameter cable has 7,000-lb breaking strength
• Safe working load: 1,400-lb line pull

Duty Cycle:
• 25%—15 min/hour

Shipping Weight:
102 lbs

Available Factory Options:
• 208 Volt single phase motor
• Freewheeling clutch
• Limit switch
• Emergency hand crank
• Variable speed control
• Radio remote control
• High speed gears

Other Related Products:



Hydraulic Winch & Hoist	Electric Winch & Hoist	Pneumatic Winch & Hoist	Hand Winches & Hoist	Ship Mooring Winches


Chain Hoists & Trolley	Marine Capstans	I Beam Crane Hoists	Davit Cranes	Quick Release Hooks