Industrial Oil Water Monitor

OMD-15 and OMD-15A

OMD-15A with Auto-Clean System

The OMD-Series includes a Monitor, the OMD-15, for the control of Oil-in-Boiler Feedwater or Boiler Condensate. This Monitor is type approved by Germanischer Lloyd in accordance with the IMO-Resolution MEPC.60(33) and with the "Technische Regeln für Dampfkessel TRD 604", sheet 1. Utilizing the latest "state of the art" in micro-processor design and measuring technique, the benefits of the OMD-15 are:

Specification OMD-15 Series

Range:	0 - 9,9 ppm
Accuracy:	Better than +/- 1 ppm insoluble Oil (with special calibration)
Degree of Protection:	IP 65
Size OMD-15:	175 x 190 x 220 mm (W x H x D)
Size OMD-15A:	210 x 330 x 220 mm (W x H x D)
Sample Temperature:	+1° to +90° C
Alarm Contact Rating:	Potential-free 1 pole change-over contacts, 3 A / 24 V
Alarm Operating Points:	2 ppm (Factory Set) adjustable from 0,2 - 9,9 ppm
Alarm 1 & 2 Operating Delay:	2 - 20 sec. adjustable
Power Supply:	24 Volt AC/DC, other voltages on request
Output Signal:	0 - 20 mA or 4 - 20 mA, reversible Ri < 500 W

Models: OMD-15 - without Auto-Clean System and OMD-15A - with Auto-Clean System

[ Home ] [ Up ] [ OMD-7 Industrial Oil Water Monitor ] [ OMD-12 Industrial Oil Water Monitor ] [ OMD-15 Industrial Oil Water Monitor ] [ OMD-17 Industrial Oil Water Monitor ]

Join PM&I's Email Newsletter List

Free Classified Equipment Ads: Global & Comprehensive

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile �� Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.