Hydraulic Recovery Winches

Planetary Gear Recovery Winches
H50B Series

Our planetary gear recovery winches are a high performance product designed to provide many years of service.

Standard Features:

Easy & efficient installation procedures

Band brake controls back-spinning and bird-nesting of wire rope when clutch is disengaged

Visible freespool clutch with negative draft jaws for positive engagement under load

Patented brake valve for smooth and precise load control

Optional Features:

2 speed hydraulic motors

Drum size

Model	Type	Rated Capacity	Weight
HP50B	Hyd.	50,000 lbs (22,680 kg)	1,075 lbs (488 kg)

Below models represent only a small number of gearbox and motor configurations.

Contact PM&I for complete product information: info@pacificmarine.net

HP50B-LP-104077/038-01
	Low Speed				High Speed
	Line Pull		Line Speed		Line Pull		Line Speed
Layer	(lbs)	(kg)	(fpm)	(mpm)	(lbs)	(kg)	(fpm)	(mpm)
1	50,000	22,680	31	9	23,700	10,750	62	19
2	40,900	18,550	37	11	19,400	8,800	75	23
3	34,600	15,700	44	13	16,400	7,440	89	27
4	30,000	13,690	51	16	14,220	6,450	103	31
5	26,500	12,020	58	18	12,550	5,690	117	36
6	23,700	10,750	65	20	11,200	5,080	131	40
	7.33/3.80 cu in. 2-Speed Gear Motor (125/63cc) 2440 PSI (16,445 kPa) @ 60 gpm (227 lpm) Wire Rope Diameter: 7/8”

HP50B-LP-104080/040-01
	Low Speed				High Speed
	Line Pull		Line Speed		Line Pull		Line Speed
Layer	(lbs)	(kg)	(fpm)	(mpm)	(lbs)	(kg)	(fpm)	(mpm)
1	50,000	22,680	26	8	24,200	10,980	53	16
2	40,900	18,550	32	10	19,800	8,980	65	20
3	34,600	15,690	38	12	16,750	7,600	77	23
4	30,000	13,610	44	13	14,500	6,580	89	27
5	26,500	12,020	50	15	12,800	5,810	101	31
6	23,700	10,750	56	17	11,450	5,190	113	34
	8.00/4.00 cu in. 2-Speed Vane Motor (130/65cc) 2000 PSI (13,790 kPa) @ 50 gpm (190 lpm) Wire Rope Diameter: 7/8”