Split Roller Propeller Shaft Bearings

Propeller Line Shaft Bearings

Important Dimensions Required for Quotes:
Shaft Diameter
Distance from Bottom of Pillow Block to Center of Shaft (Existing Applications Only)

Pillow block split roller bearings are the most common way to support the propeller shaft between the gearbox and the stern tube bearing. The number of bearings is determined by the length of the shaft.

Pillow block bearings can be "expansion" type or "fixed" type. Each shaft should have 1 fixed point on it and the rest should be expansion for small amounts of thermal expansion in the shaft. On a propeller shaft the fixed bearing point is the thrust bearing. This means that all the pillow block bearings should be expansion type and allow for expansion and contraction of the shaft during temperature changes.

These type bearings are packed with grease. They are self aligning. The bearing is fully split so parts or the complete bearing can be replaced without removal of the shaft.

Part Numbers and Drawings:

Split Roller Propeller Shaft Bearings Up to 6 Inch

Split Roller Propeller Shaft Bearings 6 to 14 Inch

Split Roller Propeller Shaft Bearing 15 to 24 Inch

How to Choose A Propeller or Rudder Shaft Bearing and the Differences Between Bearing Types

[ Home ] [ Up ] [ Cutless Bearings - Cutlass Bearing ] [ Rudder Bearings ] [ Split Roller Propeller Shaft Bearings ] [ Babbit Propeller Shaft Bearings ] [ Composite Bearings ] [ Demountable Stave Propeller Shaft Bearings ] [ Babbitt Stern Tube Propeller Shaft Bearings ] [ Romor I, Class II Stave Propeller Shaft Bearings ] [ Brass Backed Stave Propeller Shaft Bearings ] [ How to Choose A Propeller Shaft Bearing Or Rudder Shaft Bearing ]

Join PM&I's Email Newsletter List

Free Classified Equipment Ads: Global & Comprehensive

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.