Rudder Bearings

Pacific Marine & Industrial

Manufacturing & Global Distribution: Marine, Industrial & Defense

Info@PacificMarine.net ◊ EnEspanol@PacificMarine.net ◊

How PM&I Can Help Prevent Delays

Free Classified Equipment Ads: Global & Comprehensive

Purchase ONLINE Select Products Only

Rudder Bearings

Molded Nitrile Rubber Rudder Bearing	Cutless Bearings	Composite Bearings for Rudder Bearing
For Shaft Sizes from 1.458" to 9.11"	Up to 15 inch shafts	Any Size Rudder Shaft
Molded from Nitrile Composition	Naval Brass or Non Metallic	Non Metallic
Grease, Oil or Water Lubricated	Water lubricated	Self Lubricated Teflon & Molybdenum

How to Choose A Propeller or Rudder Shaft Bearing and the Differences Between Bearing Types

PM&I supplies rudder bearings in molded nitrile rubber, naval brass or non-metallic cutless, and self-lubricated composite designs, sized for rudder shafts from 1.458" up to any size shaft depending on bearing type. The catalog includes molded nitrile rubber rudder bearings (for shaft sizes from 1.458" to 9.11", grease, oil, or water lubricated), cutless bearings (naval brass or non-metallic construction, up to 15" shafts, water lubricated), and composite bearings (non-metallic, self-lubricated with Teflon and molybdenum, sized for any rudder shaft diameter). A dedicated guide is available covering how to choose between propeller and rudder shaft bearing types and the differences between designs, helping match lubrication method and shaft size to the correct bearing type. Whether you're replacing a molded nitrile rudder bearing or specifying a self-lubricated composite bearing for a large rudder shaft, PM&I's rudder bearing catalog is backed by manufacturing and distribution experience serving marine, industrial, and defense customers worldwide since 1985. Browse the full rudder bearing catalog above, or contact PM&I directly for engineering support and custom fabrication.

[ Home ] [ Up ] [ Cutless Bearings - Cutlass Bearing ] [ Rudder Bearings ] [ Split Roller Propeller Shaft Bearings ] [ Babbit Propeller Shaft Bearings ] [ Composite Bearings ] [ Demountable Stave Propeller Shaft Bearings ] [ Babbitt Stern Tube Propeller Shaft Bearings ] [ Romor I, Class II Stave Propeller Shaft Bearings ] [ Brass Backed Stave Propeller Shaft Bearings ] [ How to Choose A Propeller Shaft Bearing Or Rudder Shaft Bearing ]

Join PM&I's Email Newsletter List

Free Classified Equipment Ads: Global & Comprehensive

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.

Rudder Bearings

PM&I supplies rudder bearings in molded nitrile rubber, naval brass or non-metallic cutless, and self-lubricated composite designs, sized for rudder shafts from 1.458" up to any size shaft depending on bearing type.

A dedicated guide is available covering how to choose between propeller and rudder shaft bearing types and the differences between designs, helping match lubrication method and shaft size to the correct bearing type.

Whether you're replacing a molded nitrile rudder bearing or specifying a self-lubricated composite bearing for a large rudder shaft, PM&I's rudder bearing catalog is backed by manufacturing and distribution experience serving marine, industrial, and defense customers worldwide since 1985.

Browse the full rudder bearing catalog above, or contact PM&I directly for engineering support and custom fabrication.