Spinner 2 Oil Filter

Spinner ii Oil Centrifuge

Up to 2 GPM or 7.6 Liters Per Minute

Disposable Rotor (No Bowl Cleaning)

With and Without LCB*

Up to 500cc of Contaminants

*LCB is the Level Control Base.

The LCB allows for level or slightly uphill oil return.

The LCB requires compressed air for operation.

Product should be sized to circulate oil sump 4 to 5 times per hour.

Centrifugal Oil Purification System - Removes Particles Down to .1 Micron

Extends Oil Change Interval - Extends Engine Life

Operates on engine oil pressure

For: Engine lubricants, gear oils, machining fluids, hydraulic oils, quench oils

Engine mounted or side mounted

Operates on oil pressure only

Remove particles down to 1/10 of a micron

Remove carbon and soot

Use in addition to your full flow filter system

Stand alone pump assisted units available

Protects Machinery:

Reduces wear up to 50%

Increases engine / component life

Helps reduce frequency of maintenance and repair

Extends Operating Intervals

Keeps fluids and additives effective longer

Prolongs full flow filter life

Centrifuge requires minimal service

Eliminates Waste

Permanent, cleanable and reusable

No media or filter element to replace

Protects the environment by reducing disposable waste

Sample of Dirty Spinner Bowl

Remove particles down to .1 micron

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.