Series 2" Petroleum Hose Reel

To Handle Single 1 1/2 or 2 Inch ID Hose

Manual or Power Rewind

To handle single 1-1/2" or 2" I.D. hose.

• Gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor.

• Optional auxiliary crank rewind for power rewind reels.

• Choose EP or EPJ option.

• Comet brake on power rewind without auxiliary crank.

• 90° ball bearing swivel joint with 2" victaulic.

• Flanged riser with 2" female NPT threads.

• Other sizes and/or threads can be furnished and must be specified.

• Inlet, riser, hub assembly are steel.

• Stainless steel, aluminum at extra cost.

• Rollers may be purchased, specify roller position.

• Mounting brackets are necessary.

• Pressures to 600 psi (41 bar).

• Temperatures from -60° F to +175° F (-51° C to +79° C).

• Consult PM&I for other pressures & temps.