Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
Contact Information       

How PM&I Can Help Prevent Delays

Marine Damper Plates

Damper Plate Marine

Between Marine Engine and Gearbox

Selection of Drive Plate Gearbox Details by Brand and Model
Standard Back Plates Damper Selection
Element to Capacity Cross Reference Catalog in PDF Format
Advantage of PM&I Damper Drive Plates:
Reduce Gear Noise
Allow Engine to Run at Lower Speeds
Back Plate Punched and Ready to Install
Fail Safe Design
No Springs to Rust Solid, Fret or Rattle
Information Needed to Size and Quote Properly:
1. Manufacturer of Engine, Engine HP, Engine Speed (Max) and Number of Cylinders
2. Manufacturer of Gearbox, Model No. and Spline Details
3. Back plate diameter, number of holes, size of holes, pitch circle diameter.
Does the plate fit the face of the flywheel or into a register.
4. Will element of the drive plate fit on the outside of the flywheel or be reversed and fit inside the flywheel recess?
5. Type of application (Pleasure or work boat)? Does vessel spend long periods of time at low engine speeds?
If an existing installation with a failed part:
1.  Type and part number of damper that has failed.
2.  What part has failed? Spline or Element / Springs
This catalog page includes:
marine damper plate, damper plate marine, marine drive plates, damper plates marine engine, marine damper drive plates

Home ] Up ] Air Conditioning and Ventilation ] Bearings - Pump Shaft ] Bearings - Propeller Shaft and Rudder ] Bearings - Split Roller ] Bearings - SAF Housing Replacement ] Bearings - Thrust ] [ Damper Plates ] Engine Mounts ] Evaporators ] Filters (Replacement) ] Fuel Purification - Centrifuge and Coalescer ] Flexible Couplings (Shaft) ] Gearboxes ] Heat Exchangers ] Hose Reel ] Marine Electric Motors ] Oil Purification - Centrifuge and Coalescer ] Oil Water Separators ] Pipe and Pipe Components ] Propeller and Propeller Shaft ] Pumps ] Purifiers (Fuel or Oil) ] Marine Sewage Treatment Systems ] Marine Shaft Seals ] Strainers ]

California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
      World Wide Community Servicec  Project List PM&I
Pacific Marine & Industrial is
a registered service mark of:
Quality Pacific Manufacturing, Inc.
Copyright 1985-2018
 All Rights Reserved